Reliability tests

Software Embedded
7

@Scuba , I’m getting a similar issue. Device connects, get good speeds for 20-40s then 10-20s no data, cycle repeats:

image
image425×922 42.3 KB

Config:

  1. Access Point 1
  • HaLow Mode: Access Point
  • Network Mode: Device gets IP from Upstream Network (2.4GHz)
  • WiFi: Enabled & working well (no reliability issues when connected to the AP-1 WiFi Network).
  • DHCP Server: Enabled (default)
  • Static IP (192.168.12.2) set for Extender 1 to manage both devices when connected to either AP.
  1. Extender 1
  • Extender Mode
  • HaLow linked using WDS Mode button (successful)
  • DHCP Server: Enabled (when disabled, client devices don’t obtain IP from Edge 2.4Ghz network)
  • WiFi: “HaLowLink1-Edge”. Enabled & connects, but network stability is poor (40s acceptable speed, the no data (approx. 20 sec)
  • LAN connected devices don’t experience the same disconnection challenges

image
image1224×186 37.4 KB

The lack of functionality with Wizard when in Extender Mode could be improved (e.g. Client Wizard, STA- Bridge Mode