openwrt build for artini queries

Software Embedded
1

I buid the image with the following read me (openwrt/README.md at mm/v23.05.5 · MorseMicro/openwrt · GitHub)
have few questions

  1. Can somebody confirm HL1 config in morse micro is for the board Halowlink1 (End Products - Morse Micro)

  2. the webserver also comes with the config ```
    ./scripts/morse_setup.sh -i -b artini

2

Hi abhi
Yes HL1 in the readme refers to HaLowLink1!

If you mean the UI for the device, yes it will be included in the configuration after that command.

3

HI,
This is the firmware i should flash right ? openwrt-morse-2.7-dev-artini.bin

4

This is the only image i got as bin, the other one is the uboot*.bin.
If this is the right image could you mention the steps to flash the image.

5

Yes that is the correct file.

To flash the firmware, navigate to the HaLowLink1 Web UI and under Advanced Config → System → Backup / Flash Firmware → Flash Image.