Help integrating AHM26108D / MM6108 (APIM2) module with Raspberry Pi 4

General
1

Help integrating AHM26108D / MM6108 (APIM2) module with Raspberry Pi 4

Hello,

I am trying to integrate a Morse Micro MM6108–based HaLow module (AHM26108D / APIM2) with a Raspberry Pi 4.

I am not sure which driver, firmware, or configuration steps are required to make the module work on Raspberry Pi OS.

Could someone from the community please guide me on the following:

  1. Correct software/driver package and firmware blobs for Pi 4.

  2. Any kernel patches or board config changes needed.

  3. Example setup instructions (similar to the EKH01 evaluation kit).

  4. Power/antenna requirements I should confirm.

My setup:

  • Raspberry Pi 4 Model B

  • OS: Raspberry Pi OS (latest stable)

  • Module: AHM26108D (MM6108) — M.2 form factor

  • Goal: Bring up the module as a Wi-Fi HaLow interface (station or AP).

Any advice, links to documentation, or reference images would be greatly appreciated.

Thank you!

2

This is a duplicate of Request for Raspberry Pi 4 troubleshooting/Setup Guide for MM6108 HaLow Module (APIM2 Adapter, UART/SDIO).

Closing.