When I try to setup mesh via Quick config → Easy mesh I get the following:
Interesting. This might be some discrepancy with the open source version; it would usually mean that prplmesh is missing entirely from your build.
If you check your installed packages, is prplmesh there?
I don’t think it has that package. Below is the output of “find / | grep prplmesh”
Try opkg list | grep prplmesh
The Open Source variant doesn’t support prplmesh yet. The Open Source trunk has only the minimum viable components to get HaLow and OpenWrt working.
We will add prplmesh shortly
1 Like
Try setting up 11s Mesh if you are keen to Mesh devices.