Hi,
It seems that when I leave the HalowLink2 powered on over night with nothing connected to it the mm8108 chip on it goes into a sleep state. In the morning no halow devices can connect to it. I have double checked that WNM-Sleep Mode is disabled in the wireless menu under the SSID settings but it still goes to sleep over night. If I leave a device connected to it over night it does not seem to go into this sleep state.
I can “wake up” the chip if I go into status->channel analysis and select the 900mhz tab. Then devices start connecting to the AP over halow.
Is there a setting I am missing to disable the sleep mode or is this a bug in the driver? Also the morse_cli reset command doesn’t seems to work either.