# Sdk 2.9.3 changes from 2.6.6

**URL:** <https://community.morsemicro.com/t/sdk-2-9-3-changes-from-2-6-6/1051>\
**Category:** General\
**Created:** [November 12, 2025, 10:42pm UTC](https://community.morsemicro.com/t/sdk-2-9-3-changes-from-2-6-6/1051 "2025-11-12T22:42:38Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![don.baker](https://avatars.discourse-cdn.com/v4/letter/d/7bcc69/32.png) [@don.baker](https://community.morsemicro.com/u/don.baker)\
**Post date:** [November 26, 2025, 8:05pm UTC](https://community.morsemicro.com/t/sdk-2-9-3-changes-from-2-6-6/1051/15 "2025-11-26T20:05:33Z")

</div>

Arien, back on 12/11/2024, you provided a script to help me get notification when AP-STA-CONNECTED or AP-STA-DISCONNECTED occurred so I could do processing based on those events. The topic is here: \*\*[Visit Topic](https://community.morsemicro.com/t/gpio-led-control/141/17) (\*\*[GPIO LED control - #17 by ajudge](https://community.morsemicro.com/t/gpio-led-control/141/17)).

That was for 2.6.6, but it’s not doing the same thing in 2.9.3. It’s not sending anything at all to the ACTION\_SCRIPT.

In /etc/rc.local, I have these, which I have echo’s in hostap-leds to verify it is doing something:

service hostap-leds enable  
service hostap-leds start

I basically need to know on the AP when those events above happen. I don’t know what changed in 2.9.3 that I can’t use the ones that worked in 2.6.6, so I would appreciate some guidance. But maybe this is it: there is no file in this line defined by this in 2.9.3: PROG=/sbin/hostapd\_cli\_s1g. It’s in /usr/sbin/hostapd\_cli\_s1g. Would that be it?

---

_[View the full topic](https://community.morsemicro.com/t/sdk-2-9-3-changes-from-2-6-6/1051)._