# openwrt build for artini queries  

**URL:** https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441
**Category:** Embedded
**Tags:** halowlink-1
**Created:** [April 1, 2025, 9:50pm UTC](https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441 "2025-04-01T21:50:45Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![abhi](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@abhi](https://community.morsemicro.com/u/abhi)
#### Post date: [April 1, 2025, 9:50pm UTC](https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441/1 "2025-04-01T21:50:45Z")

</div>

I buid the image with the following read me ([openwrt/README.md at mm/v23.05.5 · MorseMicro/openwrt · GitHub](https://github.com/MorseMicro/openwrt/blob/mm/v23.05.5/README.md))  
have few questions

1. Can somebody confirm HL1 config in morse micro is for the board Halowlink1 ([End Products - Morse Micro](https://www.morsemicro.com/end-products/))

2. the webserver also comes with the config ```  
./scripts/morse\_setup.sh -i -b artini

---

<div class="post-metadata">

### Author: ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)
#### Post date: [April 1, 2025, 9:53pm UTC](https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441/2 "2025-04-01T21:53:09Z")

</div>

Hi abhi  
Yes HL1 in the readme refers to HaLowLink1!

If you mean the UI for the device, yes it will be included in the configuration after that command.

---

<div class="post-metadata">

### Author: ![abhi](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@abhi](https://community.morsemicro.com/u/abhi)
#### Post date: [April 2, 2025, 2:43am UTC](https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441/3 "2025-04-02T02:43:16Z")

</div>

HI,  
This is the firmware i should flash right ? openwrt-morse-2.7-dev-artini.bin

---

<div class="post-metadata">

### Author: ![abhi](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@abhi](https://community.morsemicro.com/u/abhi)
#### Post date: [April 2, 2025, 2:45am UTC](https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441/4 "2025-04-02T02:45:09Z")

</div>

This is the only image i got as bin, the other one is the uboot\*.bin.  
If this is the right image could you mention the steps to flash the image.

---

<div class="post-metadata">

### Author: ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)
#### Post date: [April 2, 2025, 3:26am UTC](https://community.morsemicro.com/t/openwrt-build-for-artini-queries/441/5 "2025-04-02T03:26:22Z")

</div>

Yes that is the correct file.

To flash the firmware, navigate to the HaLowLink1 Web UI and under Advanced Config → System → Backup / Flash Firmware → Flash Image.