# MM6108 , custom modification of firmware?

**URL:** <https://community.morsemicro.com/t/mm6108-custom-modification-of-firmware/743>\
**Category:** Software\
**Created:** [August 10, 2025, 2:35pm UTC](https://community.morsemicro.com/t/mm6108-custom-modification-of-firmware/743 "2025-08-10T14:35:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Skt](https://avatars.discourse-cdn.com/v4/letter/s/a9a28c/32.png) [@Skt](https://community.morsemicro.com/u/Skt)\
**Post date:** [August 10, 2025, 2:35pm UTC](https://community.morsemicro.com/t/mm6108-custom-modification-of-firmware/743/1 "2025-08-10T14:35:54Z")

</div>

Hey guys, please tell me how to custom-modify the firmware of mm6108.

---

<div class="post-metadata">

**Author:** ![Zandr](https://sea1.discourse-cdn.com/flex001/user_avatar/community.morsemicro.com/zandr/32/42_2.png) [@Zandr](https://community.morsemicro.com/u/Zandr)\
**Post date:** [August 11, 2025, 1:19am UTC](https://community.morsemicro.com/t/mm6108-custom-modification-of-firmware/743/2 "2025-08-11T01:19:18Z")

</div>

The on-chip firmware is not user-modifiable.  
The driver and the OpenWRT distribution we use on our eval kits are available [on GitHub](https://github.com/MorseMicro) in the morse\_driver and openwrt repositories. There is also a morse-feed to layer on top of an existing OpenWRT buildroot.