# MM6108 and NRC7292

**URL:** <https://community.morsemicro.com/t/mm6108-and-nrc7292/1371>\
**Category:** General\
**Created:** [February 10, 2026, 1:54am UTC](https://community.morsemicro.com/t/mm6108-and-nrc7292/1371 "2026-02-10T01:54:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![castironclay](https://avatars.discourse-cdn.com/v4/letter/c/da6949/32.png) [@castironclay](https://community.morsemicro.com/u/castironclay)\
**Post date:** [February 10, 2026, 1:54am UTC](https://community.morsemicro.com/t/mm6108-and-nrc7292/1371/1 "2026-02-10T01:54:21Z")

</div>

I know this post isn’t specifically about MM chips, but has anyone done work involving both Newracom and Morse Micro? I have some Alfa Halow-U routers as well as some AHPI7292S pi hats but I cannot get them to interoperate with the 6108 and WPA3. I consistently see RSN errors in the logs on the Morse Micro side whether I’m on pi5 or pi5 w/ openmanet. I know the NRC7292 is older compared to the 6108 but does that also mean some critical pieces are missing for a successful WPA3 connection between them? One difference is the Alfa routers are using wpa\_supplicant where MM has their wpa\_supplicant\_s1g. I fee like I’ve tried every permutation of the wpa\_supplicant settings but no luck yet.

Curious if anyone has seen this problem before.

---

<div class="post-metadata">

**Author:** ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)\
**Post date:** [February 10, 2026, 2:53am UTC](https://community.morsemicro.com/t/mm6108-and-nrc7292/1371/2 "2026-02-10T02:53:12Z")

</div>

We regularly run our software through a WFA test bed to ensure compatibility with other Wi-Fi HaLow devices following the standard. Newracom is included in that, and we can associate correctly with a [Newracom based kit](https://www.silextechnology.com/hubfs/Resource%20PDF/SX-NEWAH-ProductBrief_20200214.pdf) we have on hand, which appears to use the same chip. Might be worth reaching out to Newracom as well to see if they have any input specific to their kit.

To help debug on our side, it would be helpful to get a “sniffer” capture with a third device. See [https://www.morsemicro.com/resources/appnotes/MM\_APPNOTE-36\_How\_to\_do\_a\_Sniffer\_Capture.pdf](https://www.morsemicro.com/resources/appnotes/MM_APPNOTE-36_How_to_do_a_Sniffer_Capture.pdf)

---

<div class="post-metadata">

**Author:** ![castironclay](https://avatars.discourse-cdn.com/v4/letter/c/da6949/32.png) [@castironclay](https://community.morsemicro.com/u/castironclay)\
**Post date:** [February 10, 2026, 3:22am UTC](https://community.morsemicro.com/t/mm6108-and-nrc7292/1371/3 "2026-02-10T03:22:25Z")

</div>

I’ll start with a device in monitor mode and compare some packets. Thanks!