# HT-HC33 Halow mesh compatible with OpenMANET

**URL:** <https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951>\
**Category:** Projects\
**Created:** [August 19, 2026, 6:04pm UTC](https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951 "2026-08-19T18:04:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jasonhao](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@jasonhao](https://community.morsemicro.com/u/jasonhao)\
**Post date:** [August 19, 2026, 6:04pm UTC](https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951/1 "2026-08-19T18:04:20Z")

</div>

Here I made Heltec HT-HC33 firmware with halow mesh and batman-adv, so that it works with OpenMANET. And I customized the OpenMANET repo for Raspberry PI 5 + MM8108 Dongle. The repos as below:

Firmware: [GitHub - edgez-ai/edge-device-esp32: repo for firmware · GitHub](https://github.com/edgez-ai/edge-device-esp32)

Futter SDK: [GitHub - edgez-ai/flutter-sdk: flutter sdk for edgez mesh · GitHub](https://github.com/edgez-ai/flutter-sdk)

OpenMANET Raspberry PI 5 : [GitHub - jasonhao518/openmanet-firmware: OpenMANET firmware based on OpenWRT · GitHub](https://github.com/jasonhao518/openmanet-firmware)

 ![IMG_7670 2](https://us1.discourse-cdn.com/flex001/uploads/morsemicro/original/1X/f7ced9fd063ac0d869d526f7ce8a2fe41370c9e4.jpeg)

[https://youtu.be/xSFDQPrMySg](https://youtu.be/Pkrqur86iGs)