# How to set up MM8108 USB (EKH19) as Internet Client on Jetson Orin Nano?

**URL:** <https://community.morsemicro.com/t/how-to-set-up-mm8108-usb-ekh19-as-internet-client-on-jetson-orin-nano/1267>\
**Category:** Linux\
**Created:** [January 14, 2026, 8:53pm UTC](https://community.morsemicro.com/t/how-to-set-up-mm8108-usb-ekh19-as-internet-client-on-jetson-orin-nano/1267 "2026-01-14T20:53:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nasihabdulnazer](https://avatars.discourse-cdn.com/v4/letter/n/73ab20/32.png) [@nasihabdulnazer](https://community.morsemicro.com/u/nasihabdulnazer)\
**Post date:** [January 14, 2026, 8:53pm UTC](https://community.morsemicro.com/t/how-to-set-up-mm8108-usb-ekh19-as-internet-client-on-jetson-orin-nano/1267/1 "2026-01-14T20:53:46Z")

</div>

Hello Morse Micro Team,

I need help setting up the **MM8108-EKH19 USB Dongle** as a Wi-Fi HaLow client on my **NVIDIA Jetson Orin Nano**.

**My Goal:**  
Connect the MM8108 USB dongle to my Jetson and use it to access the internet (Station Mode) from an existing HaLow AP.

**My Setup:**

- **Device:** NVIDIA Jetson Orin Nano

- **OS:** Ubuntu 22.04 (JetPack 6.2.1)

- **Kernel:** Linux 5.15.148-tegra

**Hardware:** MM8108-MF15457(USB Dongle RD09 inside the MM8108-EKH19 Evaluation kit)

**The Problem:**  
The Jetson detects the USB device ( **`lsusb`** shows it), but no network interface (like **`wlan0`** or **`eth1`** ) appears. I tried compiling the Morse driver, but it fails because my Jetson kernel is missing “S1G” support.