# Halow for multiple sensor nodes data transmission

**URL:** <https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390>\
**Category:** Projects\
**Created:** [February 17, 2026, 6:30am UTC](https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390 "2026-02-17T06:30:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ironman-007](https://avatars.discourse-cdn.com/v4/letter/i/278dde/32.png) [@Ironman-007](https://community.morsemicro.com/u/Ironman-007)\
**Post date:** [February 17, 2026, 6:30am UTC](https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390/1 "2026-02-17T06:30:03Z")

</div>

Hi there, I’m a starter on Halow. I’m working on a project with multiple wireless sensor nodes (stations) collecting sensor data and transmitting data back to an AP through Halow. I’m planning to use FGH100M for both stations and AP. I’m using STM32U545 for each station’s host MCU.

- Is there a good example I can refer to/start with?
- Is there an off-the-shelf AP that is easy to set up and use?

Thanks so much for the help!

---

<div class="post-metadata">

**Author:** ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)\
**Post date:** [February 17, 2026, 7:52am UTC](https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390/2 "2026-02-17T07:52:36Z")

</div>

Hey @Ironman-007

> [@Ironman-007](#):
>
> Is there an off-the-shelf AP that is easy to set up and use?

We sell evaluation kits, and our HaLowLink1 and HaLowLink2 on [Mouser](https://au.mouser.com/manufacturer/morse-micro/)

See also GL.iNet who ship the HaLowLink2 directly from their store: [HaLowLink 2 | Long-range Sub-1GHz Wi-Fi HaLow Router - GL.iNet](https://www.gl-inet.com/products/halowlink2/)

Many of our design partners also ship AP evaluation products. See

- [Gateworks](https://www.gateworks.com/products/single-board-computer-development-kits/gw11048-7-gw16167-halow-development-kit/)
- [Heltec](https://heltec.org/project/ht-h7608/)
- [AsiaRF](https://asiarf.com/product/prime-selection-wi-fi-halow-set-arfhl-ap-x-2/)

> [@Ironman-007](#):
>
> Is there a good example I can refer to/start with?

The STM32U545 is in the same family as the the U585 which is used on our MM8108-EKH05 development board, though note the limited flash on the U545 might get in your way for more complex applications.

There are some basic examples in the [MM-IoT-SDK](https://github.com/MorseMicro/mm-iot-sdk/) for a FreeRTOS based environment.

If you’d prefer to use Zephyr, we have ported the core libraries of the MM-IoT-SDK to a [west module for use with Zephyr](https://github.com/MorseMicro/mm-iot-zephyr/)

---

<div class="post-metadata">

**Author:** ![Ironman-007](https://avatars.discourse-cdn.com/v4/letter/i/278dde/32.png) [@Ironman-007](https://community.morsemicro.com/u/Ironman-007)\
**Post date:** [February 17, 2026, 2:50pm UTC](https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390/3 "2026-02-17T14:50:18Z")

</div>

Thanks so much for your help! I will try it!