# assistance with setting up a mesh network with 2 x Aps **URL:** \ **Category:** General\ **Created:** [June 9, 2026, 2:11am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723 "2026-06-09T02:11:46Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![BillyP](https://avatars.discourse-cdn.com/v4/letter/b/c2a13f/32.png) [@BillyP](https://community.morsemicro.com/u/BillyP)\ **Post date:** [June 9, 2026, 2:11am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/1 "2026-06-09T02:11:46Z")
I am new to the HaloLinks - please assist - How do I set up a mesh network with 2 x APs, 6 repeaters and 20 nodes ---
**Author:** ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Post date:** [June 11, 2026, 11:58pm UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/2 "2026-06-11T23:58:02Z")
Hey @BillyP There are multiple ways to configure a mesh, and different technologies used to do so. Choosing the right approach will depend on your network requirements - 802.11s mesh, for example, will halve the maximum throughput for each hop traversed. Without knowing more about your network requirements, it’s hard to point you to a specific technology. Have a read of the two application notes, perhaps try both and see which suits your needs! EasyMesh: [https://www.morsemicro.com/resources/appnotes/MM\_APPNOTE-31\_How\_to\_Configure\_EasyMesh.pdf](https://www.morsemicro.com/resources/appnotes/MM_APPNOTE-31_How_to_Configure_EasyMesh.pdf) 802.11s Mesh: [https://www.morsemicro.com/resources/appnotes/MM\_APPNOTE-32\_How\_to\_configure\_802.11s\_Mesh.pdf](https://www.morsemicro.com/resources/appnotes/MM_APPNOTE-32_How_to_configure_802.11s_Mesh.pdf) ---
**Author:** ![james.haggerty](https://avatars.discourse-cdn.com/v4/letter/j/c68b51/32.png) [@james.haggerty](https://community.morsemicro.com/u/james.haggerty)\ **Post date:** [June 12, 2026, 3:16am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/3 "2026-06-12T03:16:20Z")
I would also suggest making sure you upgrade all your HaLowLinks to the latest version, particularly if you have HaLowLink 1s. There are some useful improvements/fixes for mesh behaviour. ---
**Author:** ![BillyP](https://avatars.discourse-cdn.com/v4/letter/b/c2a13f/32.png) [@BillyP](https://community.morsemicro.com/u/BillyP)\ **Post date:** [June 12, 2026, 1:47pm UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/4 "2026-06-12T13:47:08Z")
Thank you Sir, I have HaLowLink 2 s so I believe I am good. ---
**Author:** ![BillyP](https://avatars.discourse-cdn.com/v4/letter/b/c2a13f/32.png) [@BillyP](https://community.morsemicro.com/u/BillyP)\ **Post date:** [June 16, 2026, 1:05am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/5 "2026-06-16T01:05:32Z")
Thanks for the information, I have a schematic that I would like your comment on, could I send it to you for comment ? ---
**Author:** ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Post date:** [June 18, 2026, 7:25am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/6 "2026-06-18T07:25:54Z")
Are you able to share the schematics (or snippets) publicly in this thread? ---
**Author:** ![BillyP](https://avatars.discourse-cdn.com/v4/letter/b/c2a13f/32.png) [@BillyP](https://community.morsemicro.com/u/BillyP)\ **Post date:** [June 19, 2026, 1:36am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/7 "2026-06-19T01:36:05Z")
This forum won’t allow me to upload a pdf ---
**Author:** ![BillyP](https://avatars.discourse-cdn.com/v4/letter/b/c2a13f/32.png) [@BillyP](https://community.morsemicro.com/u/BillyP)\ **Post date:** [June 26, 2026, 6:11pm UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/8 "2026-06-26T18:11:55Z")
What poor service - I cannot find a way to get assistance - should I try another supplier ? ---
**Author:** ![ajudge](https://avatars.discourse-cdn.com/v4/letter/a/c2a13f/32.png) [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Post date:** [June 27, 2026, 6:54am UTC](https://community.morsemicro.com/t/assistance-with-setting-up-a-mesh-network-with-2-x-aps/1723/9 "2026-06-27T06:54:23Z")
pdfs are in the approved list of extensions and can be attached to your post using the upload icon. You can also attach zips containing your design files… Did you get your mesh working?