# Latest **URL:** https://community.morsemicro.com/latest.md?page=3 [Latest](https://community.morsemicro.com/latest.md) · [Categories](https://community.morsemicro.com/categories.md) · [Tags](https://community.morsemicro.com/tags.md) **Page:** 4 --- ## [Mm-iot-esp32 porting assistant error seeed XIAO Halow](https://community.morsemicro.com/t/mm-iot-esp32-porting-assistant-error-seeed-xiao-halow/1011)
**Author:** [@michaelh](https://community.morsemicro.com/u/michaelh)\ **Replies:** 8\ **Last updated:** [August 13, 2026, 7:32pm UTC](https://community.morsemicro.com/t/mm-iot-esp32-porting-assistant-error-seeed-xiao-halow/1011 "2026-08-13T19:32:39Z")
Hi I’ve been using the seeed github version of mm-iot-esp32 and the examples e.g. scan , rf-test , sta-connect just don’t seem to do anithing for example this is from the scan example: Morse Scan Demo (Built Nov 3 2… --- ## [Issue Running MM-IoT-SDK Porting Assistant on ESP32-S3 and ESP32-C6 with Seeed XIAO HaLow](https://community.morsemicro.com/t/issue-running-mm-iot-sdk-porting-assistant-on-esp32-s3-and-esp32-c6-with-seeed-xiao-halow/1451)
**Author:** [@arandaiz](https://community.morsemicro.com/u/arandaiz)\ **Replies:** 4\ **Last updated:** [August 13, 2026, 7:14pm UTC](https://community.morsemicro.com/t/issue-running-mm-iot-sdk-porting-assistant-on-esp32-s3-and-esp32-c6-with-seeed-xiao-halow/1451 "2026-08-13T19:14:32Z")
Hello everyone, I am currently trying to run the MM-IoT-SDK Porting Assistant using ESP32-S3 and ESP32-C6 with the Seeed XIAO HaLow module, but I am encountering issues during the test process. I have already tried sev… --- ## [ESP connection issue](https://community.morsemicro.com/t/esp-connection-issue/933)
**Author:** [@vic25](https://community.morsemicro.com/u/vic25)\ **Replies:** 4\ **Last updated:** [August 13, 2026, 7:09pm UTC](https://community.morsemicro.com/t/esp-connection-issue/933 "2026-08-13T19:09:00Z")
Hi everyone, I’m looking to use a MorseMicro M2 module (link) with a Freenove ESP32S3-WROOM-1 devkit (link) connected via this MikroBus M2 adapter (link). I tried to use the default pins as described by the default K… --- ## [Builds on some ESP32 boards but not others](https://community.morsemicro.com/t/builds-on-some-esp32-boards-but-not-others/403)
**Author:** [@FillOfCambs](https://community.morsemicro.com/u/FillOfCambs)\ **Replies:** 15\ **Last updated:** [August 13, 2026, 7:20am UTC](https://community.morsemicro.com/t/builds-on-some-esp32-boards-but-not-others/403 "2026-08-13T07:20:50Z")
Has anyone else managed to build the ESP32 software on anything other than the Seeed Xiao S3 which uses Xtensa architecture? I attempted to build it for the RISC5 boards but no luck. Also attempted to connect the Halow… --- ## [HaLow Support for EU Region](https://community.morsemicro.com/t/halow-support-for-eu-region/829)
**Author:** [@dataslayer](https://community.morsemicro.com/u/dataslayer)\ **Replies:** 12\ **Last updated:** [August 12, 2026, 8:44pm UTC](https://community.morsemicro.com/t/halow-support-for-eu-region/829 "2026-08-12T20:44:56Z")
First off, I really appreciate the work Morse Micro is doing — there’s a growing community of builders excited about creating MANETs powered by HaLow, and your chips are at the center of that momentum. I’ve been experim… --- ## [MM8108 GB/EU 863–868 MHz — origin of the 2.8% duty cycle, and is LBT/PSA operation available?](https://community.morsemicro.com/t/mm8108-gb-eu-863-868-mhz-origin-of-the-2-8-duty-cycle-and-is-lbt-psa-operation-available/1918)
**Author:** [@chamith1](https://community.morsemicro.com/u/chamith1)\ **Replies:** 1\ **Last updated:** [August 10, 2026, 5:40am UTC](https://community.morsemicro.com/t/mm8108-gb-eu-863-868-mhz-origin-of-the-2-8-duty-cycle-and-is-lbt-psa-operation-available/1918 "2026-08-10T05:40:07Z")
Hi all, I’m integrating the MM8108 (MF15457) on an ESP32-C5 for a marine data link in the GB regulatory domain, and I’m trying to understand the airtime limits precisely — particularly whether we’re restricted to a fixe… --- ## [WPA3-Enterprise / 802.1X support](https://community.morsemicro.com/t/wpa3-enterprise-802-1x-support/1732)
**Author:** [@nikmmm](https://community.morsemicro.com/u/nikmmm)\ **Replies:** 3\ **Last updated:** [August 8, 2026, 9:02am UTC](https://community.morsemicro.com/t/wpa3-enterprise-802-1x-support/1732 "2026-08-08T09:02:01Z")
Hello again! I have some MM8108-EKH01 devices . I want to use one as AP and 3 as STA. Does the modules support WPA3-Enterprise / 802.1X ?? I guess they suport WPA3-Personal / SAE. Have anyone test this? Thank you, Ni… --- ## [esp-halow for esp-idf v6.0+ ETA](https://community.morsemicro.com/t/esp-halow-for-esp-idf-v6-0-eta/1911)
**Author:** [@igi](https://community.morsemicro.com/u/igi)\ **Replies:** 1\ **Last updated:** [August 8, 2026, 2:24am UTC](https://community.morsemicro.com/t/esp-halow-for-esp-idf-v6-0-eta/1911 "2026-08-08T02:24:30Z")
Hello, There are breaking changes to downgrade projects based on v6.0 down to v5.x just to add MM8108 to it. Are builds for v6+ planned anywhere soon? Any ETA? Thanks. --- ## [Looking for easy-to-use Halow Gateway for industrial environments](https://community.morsemicro.com/t/looking-for-easy-to-use-halow-gateway-for-industrial-environments/1910)
**Author:** [@fchk](https://community.morsemicro.com/u/fchk)\ **Replies:** 1\ **Last updated:** [August 8, 2026, 2:21am UTC](https://community.morsemicro.com/t/looking-for-easy-to-use-halow-gateway-for-industrial-environments/1910 "2026-08-08T02:21:39Z")
Hello World, I’m looking for a mobile Halow AP for industrial environments. Consider a hall 100m x 30m x 30m where large steel parts are welded, sandblasted and coated. Some kind of robot needs to roam around and take m… --- ## ["mm8108-ekh05 v2" + esp32-p4](https://community.morsemicro.com/t/mm8108-ekh05-v2-esp32-p4/1920)
**Author:** [@igi](https://community.morsemicro.com/u/igi)\ **Replies:** 3\ **Last updated:** [August 7, 2026, 11:25am UTC](https://community.morsemicro.com/t/mm8108-ekh05-v2-esp32-p4/1920 "2026-08-07T11:25:04Z")
Hello, We are trying to pair “MM8108-EKH05 V2” and ESP32-P4. Yes, we know this board for stm32 solely. But what are the proper manipulations needed to be done so ESP32-P4 could connect to mm8108 on this board? The way… --- ## [Openwrt 24.10.0-rc7 for BPI Openwrt one](https://community.morsemicro.com/t/openwrt-24-10-0-rc7-for-bpi-openwrt-one/269)
**Author:** [@glg9369](https://community.morsemicro.com/u/glg9369)\ **Replies:** 8\ **Last updated:** [August 7, 2026, 7:00am UTC](https://community.morsemicro.com/t/openwrt-24-10-0-rc7-for-bpi-openwrt-one/269 "2026-08-07T07:00:29Z")
To start I am very new to openwrt, I am trying to setup a mm6108-mf08651-us with a Banana pi openwrt one via the mikro bus spi. Here are my questions. It appears that the Morse Micro openwrt is for openwrt 23.05.5 and t… --- ## [Mesh network not behaving as expected](https://community.morsemicro.com/t/mesh-network-not-behaving-as-expected/1604)
**Author:** [@SanderV](https://community.morsemicro.com/u/SanderV)\ **Replies:** 28\ **Last updated:** [August 7, 2026, 3:03am UTC](https://community.morsemicro.com/t/mesh-network-not-behaving-as-expected/1604 "2026-08-07T03:03:39Z")
Hi! I am setting up an 802.11s mesh but it is not behaving as expected in a multi‑hop scenario. Here is my setup: Mesh gate (MG): This is either a Heltec or Alfa Halow router set up as a Mesh gate through the UI wizar… --- ## [MM8108-EKH05 User Guide outdated](https://community.morsemicro.com/t/mm8108-ekh05-user-guide-outdated/1906)
**Author:** [@s.bosch](https://community.morsemicro.com/u/s.bosch)\ **Replies:** 1\ **Last updated:** [August 7, 2026, 1:44am UTC](https://community.morsemicro.com/t/mm8108-ekh05-user-guide-outdated/1906 "2026-08-07T01:44:16Z")
I am using this user guide: https://www.morsemicro.com/resources/user\_guides/MM8108-EKH05-User-Guide.pdf Yet all of the information on the STM32CubeIDE seems to be outdated. When I use an older version like 1.15.1, whic… --- ## [Assistance with BCF selection for FG4108E-S \[EU\]](https://community.morsemicro.com/t/assistance-with-bcf-selection-for-fg4108e-s-eu/1897)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 3\ **Last updated:** [August 4, 2026, 6:35am UTC](https://community.morsemicro.com/t/assistance-with-bcf-selection-for-fg4108e-s-eu/1897 "2026-08-04T06:35:17Z")
I could not find the specific BCF file for this particular partner module for morsemicro on the git i am aiming to use this module with morsemicro/halow component in ESP-IDF from its ESP component register, however, t… --- ## [Power output table for MM8108-M20-US](https://community.morsemicro.com/t/power-output-table-for-mm8108-m20-us/1901)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 0\ **Last updated:** [August 3, 2026, 5:19am UTC](https://community.morsemicro.com/t/power-output-table-for-mm8108-m20-us/1901 "2026-08-03T05:19:58Z")
Hi, Can I get the MCS with Power output table for MM8108-M20-US? As this module is newly available the table it not available. Thanks, Arti --- ## [Are examples supposed to work for MM8108-EKH](https://community.morsemicro.com/t/are-examples-supposed-to-work-for-mm8108-ekh/1848)
**Author:** [@kaz](https://community.morsemicro.com/u/kaz)\ **Replies:** 10\ **Last updated:** [July 31, 2026, 1:57am UTC](https://community.morsemicro.com/t/are-examples-supposed-to-work-for-mm8108-ekh/1848 "2026-07-31T01:57:17Z")
Hi, I was able to work with example EKH\_Demo using STMCubeMX and STMCubeIDE. Using CMSIS pack 1.9 and the development board 8108-EKH05. But the rest of examples they do not work, for example ping is missing some MBED T… --- ## [Configure Halow Link 2 to use 2.4gh upstream and use upstream router for ip](https://community.morsemicro.com/t/configure-halow-link-2-to-use-2-4gh-upstream-and-use-upstream-router-for-ip/1827)
**Author:** [@Kenbsherman](https://community.morsemicro.com/u/Kenbsherman)\ **Replies:** 5\ **Last updated:** [July 29, 2026, 1:05pm UTC](https://community.morsemicro.com/t/configure-halow-link-2-to-use-2-4gh-upstream-and-use-upstream-router-for-ip/1827 "2026-07-29T13:05:03Z")
I have my halow link 2 configured like this, (option 2) however I also want to have the upstream link be my 2.4ghz wifi network so I can my halow is portable. If I use option three, I can’t access the devices that are c… --- ## [Morse\_cli set ack\_timeout\_adjust?](https://community.morsemicro.com/t/morse-cli-set-ack-timeout-adjust/1692)
**Author:** [@TimW](https://community.morsemicro.com/u/TimW)\ **Replies:** 4\ **Last updated:** [July 29, 2026, 8:14am UTC](https://community.morsemicro.com/t/morse-cli-set-ack-timeout-adjust/1692 "2026-07-29T08:14:01Z")
I am hoping someone can explain exactly what “morse\_cli set ack\_timeout\_adjust X” does? I had assumed it was just an additional usecs of time added to the expected ack timeout to allow for tuning of link distances. For e… --- ## [Easy setup for reticulum network over halow2](https://community.morsemicro.com/t/easy-setup-for-reticulum-network-over-halow2/1850)
**Author:** [@michaelm253](https://community.morsemicro.com/u/michaelm253)\ **Replies:** 1\ **Last updated:** [July 29, 2026, 2:26am UTC](https://community.morsemicro.com/t/easy-setup-for-reticulum-network-over-halow2/1850 "2026-07-29T02:26:37Z")
hi i am new to the community, has anyone easily set up a Reticulum network on the halow2? --- ## [Missing KR/SG regdom sections in BCF for MM8108-MF15457](https://community.morsemicro.com/t/missing-kr-sg-regdom-sections-in-bcf-for-mm8108-mf15457/1854)
**Author:** [@jcsong](https://community.morsemicro.com/u/jcsong)\ **Replies:** 1\ **Last updated:** [July 28, 2026, 11:56pm UTC](https://community.morsemicro.com/t/missing-kr-sg-regdom-sections-in-bcf-for-mm8108-mf15457/1854 "2026-07-28T23:56:20Z")
Hi, I’m bringing up a product using the MM8108-MF15457 module (USB, via morse\_usb driver). I need to support South Korea (KR) and Singapore (SG) regulatory domains in addition to US, but the BCF files I have don’t includ… --- ## [Maximum range limit](https://community.morsemicro.com/t/maximum-range-limit/1766)
**Author:** [@kilosierra](https://community.morsemicro.com/u/kilosierra)\ **Replies:** 16\ **Last updated:** [July 28, 2026, 11:23pm UTC](https://community.morsemicro.com/t/maximum-range-limit/1766 "2026-07-28T23:23:15Z")
I have halowlink2 devices with directional antennas on two towers. With 4 watts erp i can get enough signal to exceed the 15.9 km timing limit..is there a way to extend the range in the config? --- ## [Extend HaLow range by adding external power amplifier](https://community.morsemicro.com/t/extend-halow-range-by-adding-external-power-amplifier/1773)
**Author:** [@Behnam](https://community.morsemicro.com/u/Behnam)\ **Replies:** 3\ **Last updated:** [July 28, 2026, 11:23pm UTC](https://community.morsemicro.com/t/extend-halow-range-by-adding-external-power-amplifier/1773 "2026-07-28T23:23:01Z")
Hi all, We are going to add an external bidirectional amplifier to off the shelf HaLow modem to increase TX power to maximum 30dBm that FCC defined as a conducted power limit. Are there any similar experience? Thanks … --- ## [MM8108-MF15457 + XIAO ESP32-C5, SPI transport, two custom PCBs — chip-ID read fails with DATA\_TIMEOUT after startup passes](https://community.morsemicro.com/t/mm8108-mf15457-xiao-esp32-c5-spi-transport-two-custom-pcbs-chip-id-read-fails-with-data-timeout-after-startup-passes/1870)
**Author:** [@chamith1](https://community.morsemicro.com/u/chamith1)\ **Replies:** 10\ **Last updated:** [July 28, 2026, 7:15am UTC](https://community.morsemicro.com/t/mm8108-mf15457-xiao-esp32-c5-spi-transport-two-custom-pcbs-chip-id-read-fails-with-data-timeout-after-startup-passes/1870 "2026-07-28T07:15:25Z")
MM8108-MF15457 + XIAO ESP32-C5, SPI transport, two custom PCBs — chip-ID read fails with DATA\_TIMEOUT after startup passes ESP-IDF 5.5.4, morsemicro/halow + morsemicro/firmware 2.10.4-esp32-2 (moved to local components/)… --- ## [HaLowLink 2 kernel panic in ad-hoc mode with MM8108 2.0.0 driver](https://community.morsemicro.com/t/halowlink-2-kernel-panic-in-ad-hoc-mode-with-mm8108-2-0-0-driver/1885)
**Author:** [@nate](https://community.morsemicro.com/u/nate)\ **Replies:** 1\ **Last updated:** [July 28, 2026, 4:33am UTC](https://community.morsemicro.com/t/halowlink-2-kernel-panic-in-ad-hoc-mode-with-mm8108-2-0-0-driver/1885 "2026-07-28T04:33:17Z")
I built the OpenWRT 3.1.1 image for HaLowLink 2 from source the other day with the MM8108 2.0.0 driver, 802.11s mode seems to work absolutely fine but if I switch to ad-hoc/IBSS mode, there seems to be a kernel panic sho… --- ## [2.0 Release Questions](https://community.morsemicro.com/t/2-0-release-questions/1818)
**Author:** [@castironclay](https://community.morsemicro.com/u/castironclay)\ **Replies:** 12\ **Last updated:** [July 24, 2026, 9:02pm UTC](https://community.morsemicro.com/t/2-0-release-questions/1818 "2026-07-24T21:02:49Z")
I saw some new 2.0 tags for your repositories! I’m probably just jumping the gun here but any plan to release the 2.0 patches for MM rpi-linux repo or would the 1.17.X version of the kernel work with the 2.0 version of t… --- ## [GitHub update - July 2026](https://community.morsemicro.com/t/github-update-july-2026/1878)
**Author:** [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Replies:** 0\ **Last updated:** [July 24, 2026, 3:21am UTC](https://community.morsemicro.com/t/github-update-july-2026/1878 "2026-07-24T03:21:24Z")
Hi All! Picking up the pace a little bit, we have dropped some new releases across a range of our Software projects. In order to accelerate our public release cadence and prevent the software development for one chip i… --- ## [802.11s support on HaLowLink hardware](https://community.morsemicro.com/t/802-11s-support-on-halowlink-hardware/1859)
**Author:** [@deavmi](https://community.morsemicro.com/u/deavmi)\ **Replies:** 7\ **Last updated:** [July 24, 2026, 12:02am UTC](https://community.morsemicro.com/t/802-11s-support-on-halowlink-hardware/1859 "2026-07-24T00:02:30Z")
Hi all! I would like to know whether or not your Morse Micro routers which run OpenWRT, if their chipsets (which you develop) support the 802.11s mesh standard? Very important that I figure out that detail! I also want… --- ## [TCP/IP server and client with esp32-s3](https://community.morsemicro.com/t/tcp-ip-server-and-client-with-esp32-s3/1834)
**Author:** [@Benyeh](https://community.morsemicro.com/u/Benyeh)\ **Replies:** 10\ **Last updated:** [July 23, 2026, 9:20pm UTC](https://community.morsemicro.com/t/tcp-ip-server-and-client-with-esp32-s3/1834 "2026-07-23T21:20:53Z")
Hello everyone, I’m currently working on a project to understand how to communicate using WiFi HaLow. For now, my goal is to learn the basics of communication by setting up a TCP/IP server and a client. I’m using: 2 … --- ## [Antenna Matching and RF testing](https://community.morsemicro.com/t/antenna-matching-and-rf-testing/1421)
**Author:** [@doludiran](https://community.morsemicro.com/u/doludiran)\ **Replies:** 6\ **Last updated:** [July 23, 2026, 12:50pm UTC](https://community.morsemicro.com/t/antenna-matching-and-rf-testing/1421 "2026-07-23T12:50:16Z")
Hi morse micro, We are in the process of optimizing the antenna matching for FGH100MABMD module (based on the mm6108). Is it possible to put the module into a constant transmission mode where it is either repeatedly tra… --- ## [RESET\_N pull-up resistor DNP on EKH05 schematic](https://community.morsemicro.com/t/reset-n-pull-up-resistor-dnp-on-ekh05-schematic/1874)
**Author:** [@Ottup](https://community.morsemicro.com/u/Ottup)\ **Replies:** 2\ **Last updated:** [July 23, 2026, 5:18am UTC](https://community.morsemicro.com/t/reset-n-pull-up-resistor-dnp-on-ekh05-schematic/1874 "2026-07-23T05:18:37Z")
Hi, I’m designing a custom carrier board around the MM8108-MF15457 module (mini PCIe form factor) and I’m using the MM8108-EKH05 schematic (Appendix A of the EKH05 User Guide v3) as a reference for the RESET\_N circuit. … [Previous page](https://community.morsemicro.com/latest.md?page=2) [Next page](https://community.morsemicro.com/latest.md?page=4)