# Latest **URL:** https://community.morsemicro.com/latest.md?page=2 [Latest](https://community.morsemicro.com/latest.md) · [Categories](https://community.morsemicro.com/categories.md) · [Tags](https://community.morsemicro.com/tags.md) **Page:** 3 --- ## [WiFi reception from house to metal shed that is 500' from the house and is through some trees as well.](https://community.morsemicro.com/t/wifi-reception-from-house-to-metal-shed-that-is-500-from-the-house-and-is-through-some-trees-as-well/1972)
**Author:** [@Steve](https://community.morsemicro.com/u/Steve)\ **Replies:** 1\ **Last updated:** [August 29, 2026, 2:09pm UTC](https://community.morsemicro.com/t/wifi-reception-from-house-to-metal-shed-that-is-500-from-the-house-and-is-through-some-trees-as-well/1972 "2026-08-29T14:09:13Z")
What product (if any) from Morse Micro would give me reception from our house to our shed 500 feet away? The shed is a metal building, and there are some trees between the shed and house. I would like to use it for secur… --- ## [Running multiple radios close together](https://community.morsemicro.com/t/running-multiple-radios-close-together/1969)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 2\ **Last updated:** [August 26, 2026, 7:49am UTC](https://community.morsemicro.com/t/running-multiple-radios-close-together/1969 "2026-08-26T07:49:03Z")
Hi @james.haggerty @BiaoWang , Thanks for your input. Also can you please suggest if we can run two HaLow radios simultaneously on the same evaluation boards? We understand this isn’t a common topology, but wanted to … --- ## [Seeed Studio XIAO ESP32C3 + Wi-Fi HaLow Module for XIAO: sleep power consumption](https://community.morsemicro.com/t/seeed-studio-xiao-esp32c3-wi-fi-halow-module-for-xiao-sleep-power-consumption/1949)
**Author:** [@brendando](https://community.morsemicro.com/u/brendando)\ **Replies:** 5\ **Last updated:** [August 27, 2026, 6:20am UTC](https://community.morsemicro.com/t/seeed-studio-xiao-esp32c3-wi-fi-halow-module-for-xiao-sleep-power-consumption/1949 "2026-08-27T06:20:26Z")
Hi Morse Micro team, I’ve been playing around with the combo in the title using the ESP-IDF component. I’ve been aiming to get the sleep consumption down close to where the MM6108’s snooze power consumption is in the da… --- ## [Maximum TX power on MM8108-EKH19](https://community.morsemicro.com/t/maximum-tx-power-on-mm8108-ekh19/1804)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 8\ **Last updated:** [August 27, 2026, 4:54am UTC](https://community.morsemicro.com/t/maximum-tx-power-on-mm8108-ekh19/1804 "2026-08-27T04:54:11Z")
Hi Morse Micro team, The maximum TX power of MM8108-EKH19 as mentioned in the datasheet is 26dBm But when we check it via the webGUI it is limited to 22dBm. I even tried to increase the TX power using “iw wlan0 set… --- ## [How to enable ACS (automatic channel selection) on start](https://community.morsemicro.com/t/how-to-enable-acs-automatic-channel-selection-on-start/1847)
**Author:** [@halow\_darkness](https://community.morsemicro.com/u/halow_darkness)\ **Replies:** 14\ **Last updated:** [August 27, 2026, 4:13am UTC](https://community.morsemicro.com/t/how-to-enable-acs-automatic-channel-selection-on-start/1847 "2026-08-27T04:13:14Z")
Hi Morse, Trying to enable ACS at every reboot. Setup: MM6108 module over SDIO, version 0-rel\_1\_11\_2\_2024\_Feb\_26, hostapd\_s1g v2.11-devel, kernel 5.15.71 , country US. enable\_survey module param is Y. Do i need mors… --- ## [HaLow Testing in rough forested terrain](https://community.morsemicro.com/t/halow-testing-in-rough-forested-terrain/1285)
**Author:** [@nomadros](https://community.morsemicro.com/u/nomadros)\ **Replies:** 10\ **Last updated:** [August 26, 2026, 10:01am UTC](https://community.morsemicro.com/t/halow-testing-in-rough-forested-terrain/1285 "2026-08-26T10:01:19Z")
Hi..newbie here. I’ve been testing HaLow on really rough, forested, no mobile signal, no power terrain in Spain and have a working POC (400m in bad ■■■ bush) . Actually it’s a mix of 2.4Ghz solar powered routers/extend… --- ## [Driver build fails on IEEE80211\_CHAN\_IGNORE](https://community.morsemicro.com/t/driver-build-fails-on-ieee80211-chan-ignore/1780)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 4\ **Last updated:** [July 1, 2026, 2:54am UTC](https://community.morsemicro.com/t/driver-build-fails-on-ieee80211-chan-ignore/1780 "2026-07-01T02:54:57Z")
Hi @ajudge , I am building the latest morse\_driver and still getting the below error: morse\_driver/dot11ah/s1g\_channels.c:724:70: error: ‘IEEE80211\_CHAN\_IGNORE’ undeclared (first use in this function); did you mean ‘IE… --- ## [HaLow Emergency WiFi Network](https://community.morsemicro.com/t/halow-emergency-wifi-network/352)
**Author:** [@dblair22](https://community.morsemicro.com/u/dblair22)\ **Replies:** 22\ **Last updated:** [August 25, 2026, 10:20am UTC](https://community.morsemicro.com/t/halow-emergency-wifi-network/352 "2026-08-25T10:20:33Z")
The following is from a grant application I am submitting to use HaLowLink-1 as communication system in an area without cell service. I look forward to feedback, it will only make the system better! Backgound: I am par… --- ## [Root cause for morse\_cmd\_set\_channel() failed](https://community.morsemicro.com/t/root-cause-for-morse-cmd-set-channel-failed/1889)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 6\ **Last updated:** [August 25, 2026, 4:05am UTC](https://community.morsemicro.com/t/root-cause-for-morse-cmd-set-channel-failed/1889 "2026-08-25T04:05:28Z")
Hi @ajudge , What is the root cause/ significant of this error? \[ 491.266188\] morse\_usb 2-1:1.0: Command morse\_cmd\_set\_channel 01:7e0 failed with rc -32768 (0xffff8000) \[ 491.275626\] morse\_usb 2-1:1.0: morse\_mac\_set… --- ## [Missing “Manage Embedded Software Packages” in STM32CubeIDE 2.2.0 on macOS](https://community.morsemicro.com/t/missing-manage-embedded-software-packages-in-stm32cubeide-2-2-0-on-macos/1943)
**Author:** [@Ziyao](https://community.morsemicro.com/u/Ziyao)\ **Replies:** 1\ **Last updated:** [August 25, 2026, 12:00am UTC](https://community.morsemicro.com/t/missing-manage-embedded-software-packages-in-stm32cubeide-2-2-0-on-macos/1943 "2026-08-25T00:00:25Z")
I am using STM32CubeIDE 2.2.0 on an Apple Silicon Mac running macOS 26.5.2. The MM8108-EKH05 user guide instructs me to open: Help → Manage Embedded Software Packages However, this option is missing from the Help menu… --- ## [802.11s Mesh Backhaul Stability Between Multiple HaLowLink 2 APs](https://community.morsemicro.com/t/802-11s-mesh-backhaul-stability-between-multiple-halowlink-2-aps/1955)
**Author:** [@Chaitanya](https://community.morsemicro.com/u/Chaitanya)\ **Replies:** 1\ **Last updated:** [August 24, 2026, 11:01am UTC](https://community.morsemicro.com/t/802-11s-mesh-backhaul-stability-between-multiple-halowlink-2-aps/1955 "2026-08-24T11:01:32Z")
Hello Morse Micro Community, We are working with three HaLowLink 2 APs, each using the Morse Micro MM8108-B2 802.11ah (S1G) radio. Our testcase requires a stable 802.11s mesh backhaul. One AP is configured as the mesh … --- ## [Require Assistance and schematic review For Halow Startup using SPI](https://community.morsemicro.com/t/require-assistance-and-schematic-review-for-halow-startup-using-spi/1904)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 3\ **Last updated:** [August 21, 2026, 4:52am UTC](https://community.morsemicro.com/t/require-assistance-and-schematic-review-for-halow-startup-using-spi/1904 "2026-08-21T04:52:22Z")
Hi, I have implemented a schematic for 4108E-S module from FnLink using the reference given in this document Fn-Link\_FG4108ESXX-01\_datasheet\_V1.0\_20241101 (2).pdf (2.4 MB) However, the schematic i made does not includ… --- ## [General questions regarding video streaming over long distance using WiFi HaLow](https://community.morsemicro.com/t/general-questions-regarding-video-streaming-over-long-distance-using-wifi-halow/1888)
**Author:** [@alexgosleep](https://community.morsemicro.com/u/alexgosleep)\ **Replies:** 4\ **Last updated:** [August 21, 2026, 3:58am UTC](https://community.morsemicro.com/t/general-questions-regarding-video-streaming-over-long-distance-using-wifi-halow/1888 "2026-08-21T03:58:19Z")
Hi guys, I am trying to build a video streaming pipeline using WiFi HaLow as the transmission medium. However, the distance I am able to achieve seems much less than what the videos the chip companies showcase. (for ex… --- ## [Trying to connect Lilygo T-Halow client to MM8108-EKH19 AP](https://community.morsemicro.com/t/trying-to-connect-lilygo-t-halow-client-to-mm8108-ekh19-ap/1715)
**Author:** [@Stanley](https://community.morsemicro.com/u/Stanley)\ **Replies:** 9\ **Last updated:** [August 21, 2026, 3:47am UTC](https://community.morsemicro.com/t/trying-to-connect-lilygo-t-halow-client-to-mm8108-ekh19-ap/1715 "2026-08-21T03:47:31Z")
They are having problems connecting, they seem to see each other but Claude Code thinks packets are getting dropped at Morse module level as it reloads the baked in AU country code, also it’s very troubled by the country… --- ## [KVR / Soft Roaming Support for MM8108-B2 HaLow APs](https://community.morsemicro.com/t/kvr-soft-roaming-support-for-mm8108-b2-halow-aps/1930)
**Author:** [@Chaitanya](https://community.morsemicro.com/u/Chaitanya)\ **Replies:** 1\ **Last updated:** [August 20, 2026, 5:39am UTC](https://community.morsemicro.com/t/kvr-soft-roaming-support-for-mm8108-b2-halow-aps/1930 "2026-08-20T05:39:09Z")
Hello Morse Micro Community, We are working with two HaLowLink 2 APs, each using the Morse Micro MM8108-B2 802.11ah (S1G) radio. Our objective is to perform client roaming between these two HaLow APs. Both APs are conf… --- ## [Unable to change MCS for MorseMicro MM8108](https://community.morsemicro.com/t/unable-to-change-mcs-for-morsemicro-mm8108/1464)
**Author:** [@toast\_apd](https://community.morsemicro.com/u/toast_apd)\ **Replies:** 18\ **Last updated:** [August 20, 2026, 5:33am UTC](https://community.morsemicro.com/t/unable-to-change-mcs-for-morsemicro-mm8108/1464 "2026-08-20T05:33:52Z")
\*\*Problem Summary \*\* I have a mesh network configured using two MM8108 chips which are both configured at a channel width of 2 MHz and a center frequency of 915MHz. My chip is refusing to change its MCS from auto-negot… --- ## [Feasibility of Porting Wi-Fi HaLow Code from STM32U to STM32F407G-DISC1](https://community.morsemicro.com/t/feasibility-of-porting-wi-fi-halow-code-from-stm32u-to-stm32f407g-disc1/1916)
**Author:** [@amaljishnuinthings7](https://community.morsemicro.com/u/amaljishnuinthings7)\ **Replies:** 11\ **Last updated:** [August 20, 2026, 5:03am UTC](https://community.morsemicro.com/t/feasibility-of-porting-wi-fi-halow-code-from-stm32u-to-stm32f407g-disc1/1916 "2026-08-20T05:03:08Z")
Dear Team, I would like to confirm whether the existing Wi-Fi HaLow code, which is currently developed for the STM32U series MCU, can be ported to the STM32F407G-DISC1 platform. Is this migration officially supported? … --- ## [Raspberry Pi 5 Seedstudio XIAO Halow (Qeutecel FGH100M-H](https://community.morsemicro.com/t/raspberry-pi-5-seedstudio-xiao-halow-qeutecel-fgh100m-h/1941)
**Author:** [@Kenbsherman](https://community.morsemicro.com/u/Kenbsherman)\ **Replies:** 4\ **Last updated:** [August 20, 2026, 4:52am UTC](https://community.morsemicro.com/t/raspberry-pi-5-seedstudio-xiao-halow-qeutecel-fgh100m-h/1941 "2026-08-20T04:52:36Z")
I’ve followed the instructions in the Build Thread: HaLow for Raspberry Pi OS thread and started out using the same pin mappings specified in the morse-spi.dts file. I’m completely new to this subject and thought the sam… --- ## [Low speed for image transmission using HTTP on esp](https://community.morsemicro.com/t/low-speed-for-image-transmission-using-http-on-esp/1940)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 1\ **Last updated:** [August 20, 2026, 4:38am UTC](https://community.morsemicro.com/t/low-speed-for-image-transmission-using-http-on-esp/1940 "2026-08-20T04:38:15Z")
hi, I am using ESP P4 with OV5647 Mipi CSI, connected to FGH100MAAMD2 card using SPI in STA mode it is connected to HalowLink2 in AP mode which is connected to my home WIFI 2.4ghz. I am trying to upload an image (1… --- ## [HT-HC33 Halow mesh compatible with OpenMANET](https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951)
**Author:** [@jasonhao](https://community.morsemicro.com/u/jasonhao)\ **Replies:** 0\ **Last updated:** [August 19, 2026, 6:04pm UTC](https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951 "2026-08-19T18:04:20Z")
Here I made Heltec HT-HC33 firmware with halow mesh and batman-adv, so that it works with OpenMANET. And I customized the OpenMANET repo for Raspberry PI 5 + MM8108 Dongle. The repos as below: Firmware: GitHub - edgez… --- ## [Scan example for ESP 32 P4 Devkit does not detect AP from SoftAP example](https://community.morsemicro.com/t/scan-example-for-esp-32-p4-devkit-does-not-detect-ap-from-softap-example/1922)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 7\ **Last updated:** [August 18, 2026, 12:01am UTC](https://community.morsemicro.com/t/scan-example-for-esp-32-p4-devkit-does-not-detect-ap-from-softap-example/1922 "2026-08-18T00:01:11Z")
Hi, I am trying to test FGH100MAAMD M.2 boards connected to ESP 32 P4 Devkit, there are 2 such boards, i have flashed one of the ESP with “SoftAP” example from morsemicro/halow component which seems to work fine as ment… --- ## [Forcing TX power on the MM8108-EKH05](https://community.morsemicro.com/t/forcing-tx-power-on-the-mm8108-ekh05/1806)
**Author:** [@DNT](https://community.morsemicro.com/u/DNT)\ **Replies:** 12\ **Last updated:** [August 17, 2026, 9:03am UTC](https://community.morsemicro.com/t/forcing-tx-power-on-the-mm8108-ekh05/1806 "2026-08-17T09:03:05Z")
Hello, I’m currently developping a system using the MM8108-EKH05 on the TX side and the MM8108-EKH19 on the RX side. I’m having a hard time setting the transmission power to the maximum available (26dbm). I am current… --- ## [HaLow\_example\_spi project hangs in MX\_LPTIM1\_Init()](https://community.morsemicro.com/t/halow-example-spi-project-hangs-in-mx-lptim1-init/1925)
**Author:** [@s.bosch](https://community.morsemicro.com/u/s.bosch)\ **Replies:** 4\ **Last updated:** [August 17, 2026, 5:16am UTC](https://community.morsemicro.com/t/halow-example-spi-project-hangs-in-mx-lptim1-init/1925 "2026-08-17T05:16:51Z")
I cannot get the HaLow\_example\_spi to work on my MM8108-EKH05 evaluation board. For one, it doesn’t show any communication on the serial port. While stepping through the debugger I see that it hangs in a while (!LL\_LPTI… --- ## [STA\_Connect example timeout issue](https://community.morsemicro.com/t/sta-connect-example-timeout-issue/1924)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 1\ **Last updated:** [August 16, 2026, 12:00pm UTC](https://community.morsemicro.com/t/sta-connect-example-timeout-issue/1924 "2026-08-16T12:00:21Z")
hi, I have 2 esp 32 p4 wifi 6 devkits, connected to FGH100MAAMD M.2 boards (soldered using thin wires less than 6cm in lenght) however, when i run softAP example on one esp hoping to connect to it using STA\_Connect examp… --- ## [Chip ID reading failure for ESP 32 S3 when used with Quectel FGH100MAAMD2](https://community.morsemicro.com/t/chip-id-reading-failure-for-esp-32-s3-when-used-with-quectel-fgh100maamd2/1935)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 2\ **Last updated:** [August 14, 2026, 6:48pm UTC](https://community.morsemicro.com/t/chip-id-reading-failure-for-esp-32-s3-when-used-with-quectel-fgh100maamd2/1935 "2026-08-14T18:48:24Z")
hi, I am using ESP 32 S3 with Quectel FGH100MAAMD, when i run porting assistant it always fails at Read chip id from the MM chip \[ FAIL \] I am using this BCF file and default S3 connecti… --- ## [How do I configure a EKH05 to be a sniffer?](https://community.morsemicro.com/t/how-do-i-configure-a-ekh05-to-be-a-sniffer/1934)
**Author:** [@drzwave](https://community.morsemicro.com/u/drzwave)\ **Replies:** 1\ **Last updated:** [August 14, 2026, 5:12pm UTC](https://community.morsemicro.com/t/how-do-i-configure-a-ekh05-to-be-a-sniffer/1934 "2026-08-14T17:12:36Z")
Novice HaLow user but long time embedded programmer and Wireshark user. I am experimenting with HaLow using several kits. I would like to have a sniffer to capture the radio traffic. I would like to use my EKH05 kit for… --- ## [What is the correct way for BCF input?](https://community.morsemicro.com/t/what-is-the-correct-way-for-bcf-input/1921)
**Author:** [@omumbare](https://community.morsemicro.com/u/omumbare)\ **Replies:** 3\ **Last updated:** [August 14, 2026, 4:41pm UTC](https://community.morsemicro.com/t/what-is-the-correct-way-for-bcf-input/1921 "2026-08-14T16:41:31Z")
Interestingly both formats seem to “work” when one of them should throw an error right? Both work in porting assistant and both produce bcf\_fgh100maamd.bin.mbin.S files. Is this expected? --- ## [Build Thread: HaLow for Raspberry Pi OS](https://community.morsemicro.com/t/build-thread-halow-for-raspberry-pi-os/1124)
**Author:** [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Replies:** 31\ **Last updated:** [August 14, 2026, 3:30pm UTC](https://community.morsemicro.com/t/build-thread-halow-for-raspberry-pi-os/1124 "2026-08-14T15:30:09Z")
Hi All, We’ve been getting a number of requests in the community for help integrating Morse Micro HaLow onto a number of Raspberry Pi boards - specifically those running the Raspberry Pi OS. While some users have been s… --- ## [MM6108 / FGH100M-H — exposing TSF to the host for time sync](https://community.morsemicro.com/t/mm6108-fgh100m-h-exposing-tsf-to-the-host-for-time-sync/1938)
**Author:** [@podom](https://community.morsemicro.com/u/podom)\ **Replies:** 0\ **Last updated:** [August 13, 2026, 11:49pm UTC](https://community.morsemicro.com/t/mm6108-fgh100m-h-exposing-tsf-to-the-host-for-time-sync/1938 "2026-08-13T23:49:08Z")
Hello, I’m working on a project for a large customer in acoustic sensing that requires correlating audio captured simultaneously at multiple sensor nodes. Our hard requirement for inter-node timestamp alignment is ≤25 µ… --- ## [Mm-iot-esp32 porting assistant error seeed XIAO Halow](https://community.morsemicro.com/t/mm-iot-esp32-porting-assistant-error-seeed-xiao-halow/1011)
**Author:** [@michaelh](https://community.morsemicro.com/u/michaelh)\ **Replies:** 8\ **Last updated:** [August 13, 2026, 7:32pm UTC](https://community.morsemicro.com/t/mm-iot-esp32-porting-assistant-error-seeed-xiao-halow/1011 "2026-08-13T19:32:39Z")
Hi I’ve been using the seeed github version of mm-iot-esp32 and the examples e.g. scan , rf-test , sta-connect just don’t seem to do anithing for example this is from the scan example: Morse Scan Demo (Built Nov 3 2… [Previous page](https://community.morsemicro.com/latest.md?page=1) [Next page](https://community.morsemicro.com/latest.md?page=3)