# Projects **URL:** https://community.morsemicro.com/c/project/11.md [Latest](https://community.morsemicro.com/latest.md) · [Categories](https://community.morsemicro.com/categories.md) · [Tags](https://community.morsemicro.com/tags.md) --- ## [About the Projects category](https://community.morsemicro.com/t/about-the-projects-category/22)
**Author:** [@Zandr](https://community.morsemicro.com/u/Zandr)\ **Replies:** 0\ **Last updated:** [September 12, 2024, 9:38pm UTC](https://community.morsemicro.com/t/about-the-projects-category/22 "2024-09-12T21:38:06Z")
Show off what you’ve built with HaLow. This channel is dedicated to discussing ongoing projects, brainstorming new ideas, and showcasing progress. Whether you’re seeking feedback, looking for collaborators, or sharing u… --- ## [EdgeZ Wi-Fi Halow PAwR low power sensor](https://community.morsemicro.com/t/edgez-wi-fi-halow-pawr-low-power-sensor/2103)
**Author:** [@jasonhao](https://community.morsemicro.com/u/jasonhao)\ **Replies:** 0\ **Last updated:** [October 17, 2026, 7:48am UTC](https://community.morsemicro.com/t/edgez-wi-fi-halow-pawr-low-power-sensor/2103 "2026-10-17T07:48:51Z")
Wi-Fi Halow is not only a long range Wi-Fi, it shares the same frequency as LoRa, actually it can potential work as an alternative to LoRa to provide more high frequent data update and larger data block. We makes this h… --- ## [gr-halow-mesh: open-source HaLow IQ decoder seeking 4/8 MHz test vectors](https://community.morsemicro.com/t/gr-halow-mesh-open-source-halow-iq-decoder-seeking-4-8-mhz-test-vectors/2093)
**Author:** [@Orion\_Parker](https://community.morsemicro.com/u/Orion_Parker)\ **Replies:** 0\ **Last updated:** [October 14, 2026, 8:26pm UTC](https://community.morsemicro.com/t/gr-halow-mesh-open-source-halow-iq-decoder-seeking-4-8-mhz-test-vectors/2093 "2026-10-14T20:26:14Z")
Hi everyone — I’ve published gr-halow-mesh, an independent, receive-only GNU Radio and Python project. It decodes 802.11ah raw IQ to FCS-verified frames and annotates 802.11s mesh traffic. The code is GPL-3.0-or-later. W… --- ## [Successful bring up of HaLow on a Raspberry Pi Zero 2W with NAT forwarding!](https://community.morsemicro.com/t/successful-bring-up-of-halow-on-a-raspberry-pi-zero-2w-with-nat-forwarding/912)
**Author:** [@yousefk](https://community.morsemicro.com/u/yousefk)\ **Replies:** 20\ **Last updated:** [October 2, 2026, 8:24am UTC](https://community.morsemicro.com/t/successful-bring-up-of-halow-on-a-raspberry-pi-zero-2w-with-nat-forwarding/912 "2026-10-02T08:24:17Z")
Hi all, I’ve been tinkering with the MM6108-based Heltec HT-HC01P SPI module, and I was able to successfully bring up HaLow on the Pi Zero 2W. I’ve set it up to enable NAT forwarding, and I’m using a Heltec dongle as a … --- ## [HaLow Integration on Raspberry Pi 5](https://community.morsemicro.com/t/halow-integration-on-raspberry-pi-5/88)
**Author:** [@live-love-laugh-wifi](https://community.morsemicro.com/u/live-love-laugh-wifi)\ **Replies:** 24\ **Last updated:** [September 8, 2026, 3:31am UTC](https://community.morsemicro.com/t/halow-integration-on-raspberry-pi-5/88 "2026-09-08T03:31:32Z")
Hi all, I wanted to share my recent experience bringing up WiFi HaLow on the Raspberry Pi 5 (Rpi 5). Below is a summary of the overall steps I took, issues encountered, and some tips to help others avoid the same roadbl… --- ## [Overpower Damage Estimator](https://community.morsemicro.com/t/overpower-damage-estimator/1982)
**Author:** [@andrew](https://community.morsemicro.com/u/andrew)\ **Replies:** 0\ **Last updated:** [September 2, 2026, 3:38am UTC](https://community.morsemicro.com/t/overpower-damage-estimator/1982 "2026-09-02T03:38:42Z")
--- ## [HaLow Emergency WiFi Network](https://community.morsemicro.com/t/halow-emergency-wifi-network/352)
**Author:** [@dblair22](https://community.morsemicro.com/u/dblair22)\ **Replies:** 22\ **Last updated:** [August 25, 2026, 10:20am UTC](https://community.morsemicro.com/t/halow-emergency-wifi-network/352 "2026-08-25T10:20:33Z")
The following is from a grant application I am submitting to use HaLowLink-1 as communication system in an area without cell service. I look forward to feedback, it will only make the system better! Backgound: I am par… --- ## [HT-HC33 Halow mesh compatible with OpenMANET](https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951)
**Author:** [@jasonhao](https://community.morsemicro.com/u/jasonhao)\ **Replies:** 0\ **Last updated:** [August 19, 2026, 6:04pm UTC](https://community.morsemicro.com/t/ht-hc33-halow-mesh-compatible-with-openmanet/1951 "2026-08-19T18:04:20Z")
Here I made Heltec HT-HC33 firmware with halow mesh and batman-adv, so that it works with OpenMANET. And I customized the OpenMANET repo for Raspberry PI 5 + MM8108 Dongle. The repos as below: Firmware: GitHub - edgez… --- ## [Build Thread: HaLow for Raspberry Pi OS](https://community.morsemicro.com/t/build-thread-halow-for-raspberry-pi-os/1124)
**Author:** [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Replies:** 31\ **Last updated:** [August 14, 2026, 3:30pm UTC](https://community.morsemicro.com/t/build-thread-halow-for-raspberry-pi-os/1124 "2026-08-14T15:30:09Z")
Hi All, We’ve been getting a number of requests in the community for help integrating Morse Micro HaLow onto a number of Raspberry Pi boards - specifically those running the Raspberry Pi OS. While some users have been s… --- ## [Looking for easy-to-use Halow Gateway for industrial environments](https://community.morsemicro.com/t/looking-for-easy-to-use-halow-gateway-for-industrial-environments/1910)
**Author:** [@fchk](https://community.morsemicro.com/u/fchk)\ **Replies:** 1\ **Last updated:** [August 8, 2026, 2:21am UTC](https://community.morsemicro.com/t/looking-for-easy-to-use-halow-gateway-for-industrial-environments/1910 "2026-08-08T02:21:39Z")
Hello World, I’m looking for a mobile Halow AP for industrial environments. Consider a hall 100m x 30m x 30m where large steel parts are welded, sandblasted and coated. Some kind of robot needs to roam around and take m… --- ## [Radio Frequency Planner for Wi-Fi HaLow](https://community.morsemicro.com/t/radio-frequency-planner-for-wi-fi-halow/1857)
**Author:** [@fresnelpath](https://community.morsemicro.com/u/fresnelpath)\ **Replies:** 0\ **Last updated:** [July 21, 2026, 7:03am UTC](https://community.morsemicro.com/t/radio-frequency-planner-for-wi-fi-halow/1857 "2026-07-21T07:03:03Z")
My learning about wifi halow had started from participation in the RIPE Forum few years ago. On IoT panel session I’ve been presenting the research work we had been conducting on deploying LoRaWAN-enabled environmental s… --- ## [Sports Project (Long-Distance Shooting)](https://community.morsemicro.com/t/sports-project-long-distance-shooting/1705)
**Author:** [@Fifrellin](https://community.morsemicro.com/u/Fifrellin)\ **Replies:** 4\ **Last updated:** [July 1, 2026, 8:02am UTC](https://community.morsemicro.com/t/sports-project-long-distance-shooting/1705 "2026-07-01T08:02:56Z")
Hello, I’m writing from France. I’m a long-range sport shooter (up to 1,800 meters) with a disability (a rare neuromuscular disorder). I’m a member of a small sport shooting club. I’m looking for a way to get video feed… --- ## [EdgeZ Halow Mesh node support Meshtastic app now](https://community.morsemicro.com/t/edgez-halow-mesh-node-support-meshtastic-app-now/1764)
**Author:** [@jasonhao](https://community.morsemicro.com/u/jasonhao)\ **Replies:** 0\ **Last updated:** [June 22, 2026, 9:59am UTC](https://community.morsemicro.com/t/edgez-halow-mesh-node-support-meshtastic-app-now/1764 "2026-06-22T09:59:07Z")
Meshtastic is fantastic for long range communication, but due to it’s low data rate and duty cycle, it’s hard for business usecases. We already make the Wi-Fi Halow mesh protocol works on MCUs, so just adapted it to mak… --- ## [Power Consumption Estimator](https://community.morsemicro.com/t/power-consumption-estimator/1735)
**Author:** [@andrew](https://community.morsemicro.com/u/andrew)\ **Replies:** 0\ **Last updated:** [June 11, 2026, 12:56am UTC](https://community.morsemicro.com/t/power-consumption-estimator/1735 "2026-06-11T00:56:35Z")
--- ## [LongWave Audio - multi-room audio over Wi-Fi HaLow](https://community.morsemicro.com/t/longwave-audio-multi-room-audio-over-wi-fi-halow/1693)
**Author:** [@ab\_morse](https://community.morsemicro.com/u/ab_morse)\ **Replies:** 0\ **Last updated:** [June 1, 2026, 7:18am UTC](https://community.morsemicro.com/t/longwave-audio-multi-room-audio-over-wi-fi-halow/1693 "2026-06-01T07:18:18Z")
Hi All, For a while now I have wanted to have multi room synchronous audio over WiFi HaLow. While this could be done with a couple of HaLowLinks already I wanted a dedicated solution. To address this I am happy to pres… --- ## [MM8108-MF15457 Development and doubts ](https://community.morsemicro.com/t/mm8108-mf15457-development-and-doubts/1578)
**Author:** [@HarshithG](https://community.morsemicro.com/u/HarshithG)\ **Replies:** 4\ **Last updated:** [May 7, 2026, 6:33am UTC](https://community.morsemicro.com/t/mm8108-mf15457-development-and-doubts/1578 "2026-05-07T06:33:46Z")
We are planning to use the Wi-Fi HaLow module MM8108-MF15457 and have already started our design activities. We are excited to work with this module and would appreciate technical support and guidance from your side. We… --- ## [Connection Issue between HalowLink 2 and Murata Type 2HL](https://community.morsemicro.com/t/connection-issue-between-halowlink-2-and-murata-type-2hl/1609)
**Author:** [@romainnykyforchyn](https://community.morsemicro.com/u/romainnykyforchyn)\ **Replies:** 1\ **Last updated:** [May 5, 2026, 6:12pm UTC](https://community.morsemicro.com/t/connection-issue-between-halowlink-2-and-murata-type-2hl/1609 "2026-05-05T18:12:07Z")
Hi everyone As part of a student project I’m using a Murata Type 2HL EVK in “Station” mode and a HalowLink 2 as an AP. The EVK uses the nrc7394\_sw\_pkg. I’m able to connect my Notebook via Wi-Fi 4 and I get an IP and … --- ## [WM6108/WM1302 on Ubuntu 24.04 on Pi4b success, finally.](https://community.morsemicro.com/t/wm6108-wm1302-on-ubuntu-24-04-on-pi4b-success-finally/1599)
**Author:** [@wahe](https://community.morsemicro.com/u/wahe)\ **Replies:** 0\ **Last updated:** [May 2, 2026, 2:54am UTC](https://community.morsemicro.com/t/wm6108-wm1302-on-ubuntu-24-04-on-pi4b-success-finally/1599 "2026-05-02T02:54:16Z")
morse\_driver 1.16.4 — Ubuntu 24.04 / Raspberry Pi 4B / Kernel 6.8 Build Notes Troubleshooting Summary — morse\_driver 1.16.4 on Ubuntu 24.04 / Pi 4B Overview Bringing up the Seeed WM6108 HaLow module on a Raspberry Pi 4B … --- ## [Halow Mesh client for ESP32S3 (Heltec HT-HC33)](https://community.morsemicro.com/t/halow-mesh-client-for-esp32s3-heltec-ht-hc33/1554)
**Author:** [@jasonhao](https://community.morsemicro.com/u/jasonhao)\ **Replies:** 3\ **Last updated:** [April 17, 2026, 1:03am UTC](https://community.morsemicro.com/t/halow-mesh-client-for-esp32s3-heltec-ht-hc33/1554 "2026-04-17T01:03:09Z")
We are developing Wi-Fi Halow based infrastructure, but found direct AP/STA cannot reliably cover large area. So we decided to implement the mesh protocol on the end device. Thanks to mm-iot-esp32 2.10.4 start open sour… --- ## [WLPC Competition - Race car data/telemetry system](https://community.morsemicro.com/t/wlpc-competition-race-car-data-telemetry-system/394)
**Author:** [@Identify9338](https://community.morsemicro.com/u/Identify9338)\ **Replies:** 8\ **Last updated:** [April 12, 2026, 1:28pm UTC](https://community.morsemicro.com/t/wlpc-competition-race-car-data-telemetry-system/394 "2026-04-12T13:28:59Z")
I am working on a race car data logging/telemetry system for amateur racers. It comprises a single board computer mounted in the vehicle which is connected to the pit team via a pair of HaLowLink 1’s. The SBC currently … --- ## [Clock Harmonic Interference Guide](https://community.morsemicro.com/t/clock-harmonic-interference-guide/1444)
**Author:** [@ajudge](https://community.morsemicro.com/u/ajudge)\ **Replies:** 0\ **Last updated:** [March 6, 2026, 12:22am UTC](https://community.morsemicro.com/t/clock-harmonic-interference-guide/1444 "2026-03-06T00:22:50Z")
--- ## [Halow for multiple sensor nodes data transmission](https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390)
**Author:** [@Ironman-007](https://community.morsemicro.com/u/Ironman-007)\ **Replies:** 2\ **Last updated:** [February 17, 2026, 2:50pm UTC](https://community.morsemicro.com/t/halow-for-multiple-sensor-nodes-data-transmission/1390 "2026-02-17T14:50:18Z")
Hi there, I’m a starter on Halow. I’m working on a project with multiple wireless sensor nodes (stations) collecting sensor data and transmitting data back to an AP through Halow. I’m planning to use FGH100M for both sta… --- ## [OpenMANET - Morse Micro based Radio](https://community.morsemicro.com/t/openmanet-morse-micro-based-radio/820)
**Author:** [@73challenger](https://community.morsemicro.com/u/73challenger)\ **Replies:** 3\ **Last updated:** [January 29, 2026, 2:34pm UTC](https://community.morsemicro.com/t/openmanet-morse-micro-based-radio/820 "2026-01-29T14:34:17Z")
I thought I would post what I have beenworking on. I’m basically building an Open Source MANET radio, using the Seeed board and RPI4s. This project is still fairly early, but more people are starting to help. The Morse M… --- ## [Accessing the RPI desktop (local or net)](https://community.morsemicro.com/t/accessing-the-rpi-desktop-local-or-net/1290)
**Author:** [@Laputa](https://community.morsemicro.com/u/Laputa)\ **Replies:** 2\ **Last updated:** [January 19, 2026, 11:20am UTC](https://community.morsemicro.com/t/accessing-the-rpi-desktop-local-or-net/1290 "2026-01-19T11:20:23Z")
I have purchased 2 eval radios. The wizards are a good approach, but I need to add some of my own RPi SW to the Pi. How can one make the RPI desktop accessible via the net or through one of the HDMI ports. I see the bo… --- ## [Using HaLowLink to connect SMA solar system to Starlink](https://community.morsemicro.com/t/using-halowlink-to-connect-sma-solar-system-to-starlink/1215)
**Author:** [@flex84](https://community.morsemicro.com/u/flex84)\ **Replies:** 0\ **Last updated:** [January 4, 2026, 7:16pm UTC](https://community.morsemicro.com/t/using-halowlink-to-connect-sma-solar-system-to-starlink/1215 "2026-01-04T19:16:33Z")
I recently set up a pair of HaLowLink units to connect my SMA Sunny Boy and Sunny Island solar installation to my home Starlink router. I documented the process on the DIY Solar Forum in case anyone is interested: https… --- ## [Morse Micro SPI Analyzer Saleae Extension](https://community.morsemicro.com/t/morse-micro-spi-analyzer-saleae-extension/1206)
**Author:** [@Luisschubert](https://community.morsemicro.com/u/Luisschubert)\ **Replies:** 0\ **Last updated:** [December 30, 2025, 4:44pm UTC](https://community.morsemicro.com/t/morse-micro-spi-analyzer-saleae-extension/1206 "2025-12-30T16:44:51Z")
I created an extension for Saleae’s Logic 2 that I used a lot when debugging my system’s performance over SPI. It’s proved very useful to understand what is happening on the device and thought others might find it usefu… --- ## [Change MCS index on Morse Micro MM6108-EKH01 Kit](https://community.morsemicro.com/t/change-mcs-index-on-morse-micro-mm6108-ekh01-kit/558)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 12\ **Last updated:** [November 25, 2025, 11:28am UTC](https://community.morsemicro.com/t/change-mcs-index-on-morse-micro-mm6108-ekh01-kit/558 "2025-11-25T11:28:21Z")
Hi @ajudge , We are not getting the expected range on the MM6108-EKH01 kit, which is only around 500 meter line-of-sight with datarate only in kbps. I tried different experiments, but the range remains the same. To co… --- ## [Increase TX power of morse Micro halow to 27dbm](https://community.morsemicro.com/t/increase-tx-power-of-morse-micro-halow-to-27dbm/883)
**Author:** [@arti.rajput](https://community.morsemicro.com/u/arti.rajput)\ **Replies:** 5\ **Last updated:** [September 24, 2025, 8:24am UTC](https://community.morsemicro.com/t/increase-tx-power-of-morse-micro-halow-to-27dbm/883 "2025-09-24T08:24:34Z")
Hi We have a custom Halow module with Morse Micro MM6108-MF08651-US chip. By defauly, we are getting in the logs: tx\_max\_power\_mbm : 2200 Also, the RF explorer shows 20dbm. How to increase the… --- ## [Freelancer Wi-Fi HaLow PCB project](https://community.morsemicro.com/t/freelancer-wi-fi-halow-pcb-project/842)
**Author:** [@flex84](https://community.morsemicro.com/u/flex84)\ **Replies:** 1\ **Last updated:** [September 14, 2025, 5:46pm UTC](https://community.morsemicro.com/t/freelancer-wi-fi-halow-pcb-project/842 "2025-09-14T17:46:11Z")
Saw this Freelancer job post which might be of interest to some of you: --- ## [WLPC Competition Idea - Bird Box Camera](https://community.morsemicro.com/t/wlpc-competition-idea-bird-box-camera/429)
**Author:** [@dwrice0](https://community.morsemicro.com/u/dwrice0)\ **Replies:** 3\ **Last updated:** [April 7, 2025, 10:45pm UTC](https://community.morsemicro.com/t/wlpc-competition-idea-bird-box-camera/429 "2025-04-07T22:45:27Z")
I was already building a Seeedstudio Xiao-based (ESP32 S3) microcontroller with camera to go in an American Kestrel bird box. My original idea had the solar/battery powered device sleeping and then waking up at regular … [Next page](https://community.morsemicro.com/c/project/11.md?page=1)